Hyundai H-CCR8084, Instruction Manual

Page: 6 / 23

6
Installation/Connection
Using the ISO Connector
1. If your car is equipped with the ISO
connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO
connectors, check the wiring in the vehicle
carefully before connecting, incorrect connection
may cause serious damage to this unit.
Cut the connector, connect the colored leads
of the power cord to the car battery as shown
in the colour code table below for speaker and
power cable connections.
Location Function
Connector A Connector B
1 Rear right (+) - Violet
2 Rear right (-) - Violet/Black
3 Front right (+) - Grey
4 B12V/Yellow Front right (-) - Grey/Black
5 Power antenna/Blue Front left (+) - White
6 Front left (-) - White/Black
7 Ignition/Red Rear left (+) - Green
8 Ground/Black Rear left (-) - Green/Black
Power antenna wire is intended for
power supply of the antenna and for remote
control of an additional amplifier.
1. 2.