Hyundai H-1629, Instruction Manual

Page: 3 / 11

2 3
Instruction manual Instruction manual
Earphones socket
For private listening please insert the
earphones into the Phone jack (the speaker
inside the radio disconnects automatically),
now you can listen to the radio by earphones.
Radio operation
• Press RADIO ON/OFF button once to turn
the radio on. Press the button again to turn off
the radio, the time is displayed.
• Rotate VOLUME regulator to adjust sound
volume level.
• Press AM/FM button to choose AM or FM
band.
• Rotate TUNING regulator to select your
desired station frequency.
• For FM reception, use the telescopic
antenna. Pull out the antenna and change its
length and angle for the best reception.
Storing the stations
The unit can store up to 8 AM and 8 FM
stations.
• In radio mode, select your desired station.
• Press and hold SET button to enter into
the preset mode. The preset number and CH
icon will show on the display.
• Rotate TUNING regulator to select a
memory number from 1 to 8. Press SET button
to confirm your memory setting.
Calling stored stations
In receiving state, press SET button, then
rotate TUNING regulator to select a stored
station, or press M+/M- buttons to select a
stored station.
Alarm function
Setting the alarm
Dual snooze alarms function wakes you by
the radio or buzzer.
• Close the battery compartment cover.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
• Disconnect the unit from power supply
when it is operated by batteries.
When replacing batteries the stored
information will be lost.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the power plug to the power socket
of the unit, then plug its other end into the
power supply.
• Please switch the unit off before
disconnecting it from the power supply.
General operations
Display backlight
The backlight of the display will be on after
each pressing of any button. It will go off
automatically after 10 seconds.
Time setting
• Rotate TUNER regulator to select 12-hour
or 24-hour clock display mode.
• Press SET button, then rotate TUNER
regulator to set hours. Press SET button again,
then rotate TUNER regulator to set minutes.
• To save the setting leave the unit idle for
15 seconds or press SET button.
Calendar setting
• In the clock state, press MODE button to go
to calendar mode.
• In calendar mode press SET button
repeatedly to select year, month or date for
setting. When a parameter a selected, rotate
TUNING regulator to set the parameter.
• To save the setting leave the unit idle for
15 seconds or press SET button.