5
Instruction manual
The mode will be displayed blinking. Press
SET button, then press VOL+/VOL- buttons to
select playback mode: All - Shuffle - Repeat
One - Repeat All. Press SET button to confirm.
During play mode selection, if no button
is pressed within several seconds, the unit will
return to normal playback mode.
• When all tracks are played or pause mode
is enabled, the unit will go to clock mode after
30 seconds if no buttons are pressed.
• In playback mode, press MODE button
switch off the player and go to clock mode.
If afterward you press button, the unit will
resume playing the last played track.
General USB/SD/MMC notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0) up to 32 Gb.
• This unit is also equipped with an SD/
MMC card socket that can accept and play
MP3 files stored on standard SD/MMC cards
up to 32 Gb.
Always switch off the unit or change
mode to another one before removing a
USB flash drive or SD/MMC card, to prevent
damage to your USB device or memory card.
Note:
Although this product is fully
compatible with USB 2.0 and SD/MMC card
standard formats, a small percentage of USB
flash drives and SD/MMC cards might not be
readable, due to those device manufacturers’
non-compliance with the full (official) USB and
SD/MMC card standards.
Alarm operation
Setting the alarm
• In clock mode press MODE button; the
word ALARM and bell icon will be displayed. The
alarm is in OFF state and on AM12:00 by default.
Press ALARM button to switch on/off the alarm.
• Press and hold SET button, then press
repeatedly SET button to go to setting of
parameters in following sequence: alarm
minute => alarm hour => alarm sound (MP3/
FM/Bibi). The selected parameter will blink
meaning readiness for adjustment.
• Press VOL+ button to adjust the parameter
up. Press VOL- button to adjust the parameter
down.
• In alarm time setting mode, if no button is
pressed within 30 seconds after a parameter
is selected, the unit will automatically return to
clock mode.
• In alarm time setting mode, press MODE
button to return to clock mode.
Radio/MP3 as alarm
• To use radio as alarm sound, enable radio
mode, select a station, then press and hold
ALARM button. AL SET will be displayed.
• To use MP3 as alarm sound, connect a
USB or memory card, then enable USB/SD/
MMC mode. Press
/
buttons to select a
track, then press and hold ALARM button. AL
SET will be displayed.
When select MP3 as alarm sound, the
alarm sound will change to Bibi automatically if
the current mode is USB/SD/MMC or Radio, if
USB/SD/MMC device is not detected or if the
external power supply is disconnected.
Alarm switch off and Snooze
• When the alarm signal is on, press
SNOOZE button to interrupt the alarm signal
for 5 minutes. After 5 minutes the alarm sound
will go on again.
• When the alarm signal is on, press any
button (except SNOOZE) to switch off the alarm
sound completely.
Snooze function is only available if Bibi
sound is selected for alarm signal.
Sleep timer
• In USB/SD/MMC mode or Radio mode
press ALARM button to enable sleep timer
setting mode. The time figures will blink. The
default sleep time is 30 minutes.
• Press repeatedly VOL+/VOL- buttons
