2
3
Instruction manual
Instruction manual
Power supply
Battery power
• Open the battery compartment cover.
Insert 5 AA (1.5 V) batteries. Please observe
correct battery polarities or the unit will not
work. Close the battery compartment cover.
• When the batteries are exhausted, they
should be replaced.
• Do not use new and old batteries together.
• Disconnect power cord from the socket,
when the unit is on battery supply. Battery
power is automatically disconnected when the
power cord is connected to a power socket.
AC adaptor power
• Plug the supplied AC/DC power adaptor into
the power input on the back of the unit. Connect
the power cord to the AC household main outlet.
Make sure the voltage is compatible.
• Always remember to disconnect the
power cord from the main supply before
disconnecting it from the unit.
• Disconnect the power cord from the mains
when not in use.
Additional power
There are 2 batteries AG3 (1.5 V) in the
terminal inside the battery compartment. This
is additional power intended for operation
of clock, alarm, calendar, termometer and
countdown timer. Without the additional power
the unit will function only as radio receiver.
General operations
Clock and calendar
• In clock mode (no ALARM indication)
press and hold SET button to enable time
setting mode. Press repeatedly SET button
to go to setting of parameters in following
sequence: minute => hour => 12/24-hour
=> year => month => date. The selected
parameter will blink meaning readiness for
Remote controller
1
2
3
4
5
6
7
8
1. button
2. SET button
3. MODE button
4. RADIO button
5. SNZ button (corresponds to SNOOZE
button on the unit)
6. ALM button (corresponds to ALARM button
on the unit)
7. VOL+/VOL- buttons
8.
/
buttons (correspond to
/
buttons on the unit)
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.
• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
