Hyundai H-1613, Instruction Manual

Page: 3 / 13

3
Instruction manual
check the positive and negative of the plug.
Radio operation
Band Selection
In receiving state, press BAND/MODE
button to choose FM/MW/SW programs.
Manual Search
In receiving state, press TUNING UP
or TUNING DOWN button to select your
desired station frequency. With each
pressing, the frequency varies one step,
until the station is found.
Manual searching station mode is fit
to search weak signal station.
Automatic Search
• In receiving state, press and hold
TUNING UP or TUNING DOWN button;
when you see the display frequency
automatic change, let go, when there is a
station, it will stop searching automatically.
• In the course of automatic searching,
press the up tuning or down tuning
button, it will discontinue searching.
• Automatic searching station mode
is fit to search strong signal station.
• In the course of automatic searching,
if the digit on the display screen varies
slowly, it means that there is weak signal
station nearby, you can change to use
manual to search station.
Frequency Change Rate
• Receiving FM, press TUNING UP or
TUNING DOWN button once, the frequency
increases or decreases 0.1 MHz.
• Receiving SW, press TUNING UP or
TUNING DOWN button once, the frequency
increases or decreases 0.005 MHz.
• Receiving MW, press TUNING UP
or TUNING DOWN button once, the
12. Store address indicator
13. Store station indicator
Important safeguards
• The instruction manual contains
important operating and maintenance
instructions. For your safety, it is
necessary to refer the manual. Keep the
manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration,
direct sunlight, too high or low
temperature or humidity.
• If you are not going to use the unit
within a long period of time, remove the
batteries to avoid their leakage.
• Do not use the unit near TV sets,
computers, fluorescent lamps and other
electric equipment; this may jam MW and
SW reception.
• Do not disassemble the unit
yourselves. Refer servicing to qualified
service personnel.
Power supply
Battery operation
• Open the battery compartment cover.
Insert 2 x AA batteries. Please observe
correct battery polarities or the unit will not
work. Close the battery compartment cover.
• When the batteries are exhausted,
they should be replaced.
• Do not use new and old batteries
together.
AC operation
Please use output DC 3V/300mA
regulating external direct current power,