2
3
Instruction manual
Instruction manual
accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the unit
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as an electronic
clock. Figures will blink on the display showing
that clock should be set.
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MINUTE button to set the clock
display to the correct time.
• Release all the buttons when finished the
setting.
Radio operation
Tuner operations
• Slide ON/OFF/AUTO switch to ON position.
• Slide BAND switch to AM or FM position to
select the needed band.
• Use VOLUME regulator to adjust volume
level.
• Adjust the program using TUNING
regulator.
Antenna
• For AM reception, the unit is equippped
with a built-in sensitive ferrite antenna.
• For FM reception, the unit is equipped with
an external wire antenna. Be sure to untwist
the antenna to its fullest length for a better
reception.
Sleep to music
The radio can be set to play and to switch
off automatically after a preset time. Minimal
time is 1 minute, maximal period is 1 hour 59
minutes.
• SlideON/OFF/AUTO switch to AUTO
position.
• To set for a desired period of sleep, press
and hold SLEEP button and, without releasing
it, press MINUTE button to set the desired
period of the sleep time.
• If you want to turn off the radio before sleep
time expires, press SNOOZE button.
Alarm operation
Setting the alarm
• SlideON/OFF/AUTO switch to AUTO
position.
• Press and hold ALARM SET/OFF button.
• Without releasing ALARM SET/OFF
button, press HOUR button and MINUTE
button to set the desired wake up time.
• Release ALARM SET/OFF button to show
the current time.
• The radio will play automatically at the
preset time. To switch the alarm off, press
ALARM SET/OFF button.
• The preset wake up time will be saved
in the memory of the unit, and the alarm will
sound at the same time next day.
Alarm sound setting
Follow the steps of “Setting the alarm” and
set VOLUME regulator to Buzzer position. You
will be awakened by the buzzer alarm. The
buzzer can be switched by pressing ALARM
SET/OFF button, or you can switch the buzzer
to radio by setting ON/OFF/AUTO switch to ON
position.
Snooze control
When the alarm is on, press SNOOZE button
once, after approximately 9 minutes the alarm
will be on again.
