4
Instruction manual
CD/MP3 operation
Insertion and removal of discs
• Place a disc into the compartment with the
label-side (printed side of disc) facing upwards.
Press down in the center part of disc until the
disc “locks” onto the center spindle.
• When the disc has been placed onto
the center spindle, gently lower the CD-door
downwards until it locks shut. The disc is now
ready to be played.
• Press STOP/CD/USB/SD button to stop
the disc spinning before opening the CD-door.
• To remove a disc, follow the same
procedure as described above, except to
remove the disc instead of inserting it into the
compartment, by placing one finger at the
middle of disc (center spindle) and the other at
the edge of the disc and gently pulling upwards.
Always hold a disc by its edges. Avoid
getting any fingerprints, smudges or dirt onto
the surface of a disc. In case this happens, use
a special CD-cleaning cloth or cleaning kit to
remove the dirt or smudges. Please make sure
to always fold down the handle before opening
the CD door.
General operation
• Set FUNCTION switch to CD (MP3)
position.
• Put a disc into the CD compartment and
close the CD door.
• The LCD display will show the total
number of tracks after a few second.
Play/pause mode
• Press PLAY/PAUSE button to start play,
the LCD display will show the first track and
PLAY icon.
• Press PLAY/PAUSE button to pause at
any track when playing, PLAY icon on the
display flashes.
• To stop the disc, press STOP/CD/USB/SD
button.
• If the disc contains folders with files,
select a folder by pressing SKIP+10/FOLDER
button. Also, press this button to skip 10 tracks
forward.
Skip and search mode
• Press NEXT button once to skip to the
next track.
• Press BACK button once to skip back to
previous track.
• Press and hold BACK and NEXT buttons
to start fast backward or forward playback until
you find the passage to play from.
Repeat mode
• Press REPEAT/PROG button once for
single track repeat playing.
• Press REPEAT/PROG button twice for all
tracks repeat playing.
• To cancel repeat play, press REPEAT/
PROG button once again.
Program mode
• Up to 20 tracks can be programmed for
disc play in any order or the same track can be
repeated up to 20 times. Before use, be sure to
press STOP button.
• Press REPEAT/PROG button, the memory
position number will show on the display.
• Select a desired track by using BACK and
NEXT buttons.
• Press REPEAT/PROG button to confirm.
• Repeat the two last steps as described
above to enter additional memories into the
program if necessary.
• When all the desired tracks have been
programmed, press PLAY/PAUSE button
to play the disc in the order you have
programmed.
• To stop the CD, press STOP/CD/USB/SD
button.
The program memory will be cleared
only when the CD compartment is opened or
turn off the CD or power supply.
• To turn off the CD player set FUNCTION
switch to TAPE (OFF) position.
Good quality sound is guaranteed only
when playing licensed discs.
