Hyundai H-1425, Instruction Manual

Page: 5 / 15

4
Instruction manual
position.
• Insert a USB device into the USB slot.
• Press and hold
/CD USB button to
select CD or USB mode.
• All other operations for USB are the same
as for disc playback.
• Maximum capacity USB supported is 4
Gbs.
Play/pause mode
• Press /CD USB button to start play.
• Press /CD USB button to pause at
any track when playing.
• To stop the CD, press button.
• To remove the CD from the unit open
the CD door. Always press button before
opening the CD compartment.
• To turn off the CD player set FUNCTION
switch to TAPE position.
• For MP3 discs: in stop mode, you can
press FOLDER UP button to select your
desired album followed by
/CD USB
button (for multiple albums in a MP3 disc only).
Skip and search mode
During playback you can use / to go to
previous or next track.
• If you have selected a track number in the
stop or pause position, press /CD USB
button to start playback.
• Press button once briefly for the next
track, or press repeatedly until the needed
track number is displayed.
• Press button once briefly to return to
the beginning of a current track.
• Press button more than once briefly for
a previous track.
Fast backward/ forward playback
Press and hold / buttons to start fast
backward or forward playback until you find the
passage to play from.
Play modes
While playing Audio CD:
• Press PLAY MODE button once for single
track repeat playing.
• Press PLAY MODE button twice for all
tracks repeat playing.
• Press PLAY MODE three times for playing
randomly.
• Press PLAY MODE four times for normal
playing.
While playing MP3:
• Press PLAY MODE button once for single
track repeat playing.
• Press PLAY MODE twice for all tracks
repeat playing.
• Press PLAY MODE three times for tracks
inside the album repeat playing.
• Press PLAY MODE four times for playing
randomly.
• Press PLAY MODE five times for normal
playing.
Program mode
Up to 32 tracks can be programmed for disc
play in any order or the same track can be
repeated up to 32 times. Before programming,
press button.
• Press PROG button.
• Select a desired track by using
/
buttons.
• Press PROG button to confirm.
• Repeat steps described above to enter
additional memories into the program if
necessary.
• When all the desired tracks have been
programmed, press /CD USB button to
play the disc in the order you have programmed.
You can erase the contents of the
memory by one of the following methods:
- opening the CD door
- selecting RADIO or TAPE source
- pressing
/CD USB button and then
button.
Good quality sound is guaranteed
only when playing licensed discs. Besides,
depending on the disc brand or the burning
speed some reding problems may occur.