![background image](http://html.mh-extra.com/html/hyundai/gr8/gr8_technical-service-bulletin_2197423004.webp)
GR8 DIAGNOSTIC TESTER/CHARGER TOOL AND BATTERY WARRANTY POLICY
TSB #: 18-EE-003
Page 4 of 10
SUBJECT:
Service Procedure:
First step
– Battery Test (always the initial test):
1.
Press the power button on the GR8 if the Battery Tester unit is docked on the Charger unit.
You should hear the
Charger unit’s fan come on and the Tester unit’s display will light up.
2.
Connect
only the Battery Tester unit’s small clamps
to the vehicle’s battery making sure
that the black clamp is connected to the battery negative
“-” terminal and the red cable’s
clamp is connected to the battery positive “+” terminal. GR8 display will warn if you
connected in backwards.
3.
Follow these screen by screen instructions from left to right for each row. This example
shows screens that will occur for the
battery condition of “Charge & Retest”:
Select or add yourself as a user
Connect small clamps only
Select Battery Test
Connect Test Leads at Battery Post
Enter last 6 digits of the VIN
Select battery location IN/OUT of vehicle
Battery Test or Charger clamps must be connected directly onto the battery
posts. Do not connect to the jumper terminals in the engine compartment.
NOTICE