Hyundai FM 838B, Instruction Manual

Page: 22 / 28

ENG - 22
INSTRUCTION FOR USE
Proper use produces a measurable increase in blood circulation in the skin of the feet which
manifests itself in a pleasant and lasting feeling of warmth (rise in skin temperature). Foot
massager baths at regular intervals can produce improved blood circulation in the feet and indi -
rectly in the entire leg area as well.
There are about 400 stimu-nodes act as gentle fingers to make contact with the soles of your
feet and give you most effective and invigorating massage possible. You can easily control their
effectiveness by simply pressing down lightly or letting up the pressure with your feet. There are
70 air jets provide a relaxation warm bubble bath for your feet.
INSTALATION
Place the appliance on a level surface and the non-skid rubber feet will prevent it from slipping.
Be sure the control switch is in “0” position. Then plug the unit into AC outlet (regular household
current). Do not stand on the appliance whenever the unit is operated or not. Do not plug the
appliance in while your feet are in the water.
Fill with warm water (in desired temperature) into the unit and do not fill water over the “MAX”
water-level line on the keel. This unit is designed to maintain the water temperature at a comfor -
table level, not to raise it. To check the control switch is in “0” position. Then plug the power cord
into AC outlet (regular household current).
DO NOT CONNECT OR DISCONNECT THE PLUG FROM THE POWER OUTLET WHILE
YOUR FEET ARE IN THE WATER.
Seat yourself comfortably, place feet on the foot rests and select your desired setting for heat
only, massage only, or heat and massage with pedicare functions.
Using the control switch you can select the desired applications:
COLD WATER MASSAGE OR FOOT MASSAGE WIThOUT
WATER (M)
Set switch to this mark if you want to massage your feet in cold water.
A foot vibration massage without water is also possible with this setting.
Dry massage has better result for blood circulation of your feet.
WARMTh AND MASSAGE (W+A+M)
Select this setting if you want to have the unit filled with warm water for
a foot massage and bubble bath. The built-in heater delays temperature
drop of the warm water while bathing. Temperature-controlled full-length
heaters under each of foot rests maintain the desired temperature
throughout your massager when you set the rotary switch of the unit.