Quick Reference Guide I
08
07
I
Quick Reference Guide
Elantra GT
HYUNDAI
FEATURES AND CONTROLS
Sunshade
To open the sunshade, pull the
sunroof control lever lightly backward
to the first detent position.
Push the sunroof control lever
forward to close.
Tilting the Sunroof
SUNROOF
Sliding the Sunroof
Push the sunroof control lever
upward to tilt open the sunroof.
Push again the sunroof control lever
upward to tilt the sunroof glass
closed.
Pull and hold the sunroof control lever
backward to the first detent to open
the sunroof incrementally.
Pull the sunroof control lever
backward past the first detent to slide
open the sunroof completely.
Push the sunroof control lever forward
to the second detent position to close
sunroof glass with the sunshade.
Front map lamp
1
Press the lens to turn the map lamp on or
off.
Front door lamp ( )
2
Lights will turn on when any door is
open.
Front room lamp ( )
3
Push the switch to turn the room lamp on.
Front room lamp ( )
4
Push the switch to turn the room lamp off.
2
1
1
3
4
INTERIOR LIGHTS
HOMELINK WIRELESS CONTROL SYSTEM
Standard Programming
1. For first time programming, press and hold the two outside
buttons (
,
) until the indicator light starts to flash. (to
reprogram buttons, skip this step)
2. Press and hold the desired button (
,
or
)and your
transmitter’s button at the same time until the Homelink
indicator light changes from a slow to a rapid blink.
(The transmitter has to be 1 to 3 inches away from the mirror)
The desired Homelink button is now programmed.
NOTE:
If you have a rolling code garage door opener, complete
additional steps:
3. Locate the “Learn” or “Smart” button on your garage door
opener. Press and release the button and complete Step 4
within 30 seconds.
4. Return to the vehicle and press the programmed Homelink
button up to 4 times (or until the garaged door operates)
For more detailed information, please refer to your Owner’s manual or
visit www.homelink.com
or call (800) 355-3515
