Hyundai DVBT240U, Instruction Manual

Page: 49 / 68

EN - 49
EN
Figure 3. Clear database message Figure 4. Manual Scan edit
1.2.2 manual scan
Manual Scan adds the scanning results into database, it doesn‘t erase the database. But the
User has to know the Frequency and bandwidth for scanning. If the user scans the same
Frequency
and
bandwidth
more than once, the previous programs will be overwritten. Follow
the steps (1) ~ (8) at section 1.1.
( 9 ) Press <GREEN> button to enter manual scan Page.
(10) Press <Up/Down> button to select Frequency option.
(11) Press <0~9> button to input the Frequency value.
(12)
Press <Up/Down> button to select
bandwidth
option.
(13) Press <Left/Right> button to set bandwidth value.
(14) Press <OK/Exit> button to start scan or exit.
See Figure 4.
2.menU operations
Once the channel scan is finished and all the channels are stored into the database, you can
start to watch the digital terrestrial TV channel or listen to the radio broadcast, some typical ope -
rations are given in this chapter.
2.1 main menu
main menu for operating a lot of functions.
(1) Press <Menu> button to enter main menu . See Figure 1.
(2) Press <Info> button to display the version information of STB.
2.2 setUp
Set the system settings of STB. See Figure 2.
2.2.1 installation
Set the receiving and playing program settings of STB.
2.2.1.1 antenna setting
Set the antenna power on or off to 5V power to antenna or not.