17
5.31
Make sure the water pump is on a flat stable surface.
5.32
Make sure the water pump has been filled with both fuel and oil to the correct levels.
5.33
Turn the fuel tap (1) to the
‘ON’ position.
5.34
Unscrew the STOP/RUN lever (3) and move it to the RUN position, then lock it in
position by tightening the screw.
5.35
Slowly pull the recoil start handle (2) until you feel resistance, then move the
decompression lever (5) to the down position.
5.36
Pull the recoil handle swiftly until the machine starts.
DO NOT
let the recoil handle snap back but return it to the start position slowly.
5.37
Adjust the water pump speed to the desired working speed by moving the STOP/RUN
lever to suit the load.
5.38
Move the STOP/RUN lever (3) to the STOP position.
5.39
Turn the key switch (4) anti-clockwise to the OFF position.
5.40
Turn the fuel valve (1) to the OFF position.
RECOIL START
7. STOPPING PROCEDURE
