11
3.8
Insert connect discharge hose (optional)
3.9
If desired, use a commercially available hose.
3.10
DO NOT
use a hose with an inside diameter smaller than the pumps discharge port.
3.11
Slide the cuff over the hose bar.
3.12
Insert a rubber seal into the end of the barb cuff.
3.13
Screw the hose barb assembly onto the pump in a clockwise direction until the hose
barb is tightened securely.
3.14
Slide the hose clamp over the end of the discharge hose.
3.15
Slide the discharge hose onto the hose bar.
3.16
Tighten the hose clamp securely.
