![background image](http://html.mh-extra.com/html/hyundai/df-203/df-203_instruction-manual_2196438022.webp)
22
/ 37
PREPARING YOUR FRYER FOR USE
Make sure fryer is unplugged: Wash the FRYING BASKET in hot soapy water and wipe dry
thoroughly. Wipe the interior, exterior surfaces and LID with a damp soapy cloth. Towel dry
thoroughly. Your fryer is now ready to use.
CAUTION:
Do not immerse fryer, cord, or pugs in water.
CAUTION:
Please remove plastic from fryer basket before using.
USE YOUR DEEP FRYER
NOTE:
Never turn on the fryer with an empty OIL POT. Always use your fryer on a flat,
heat resistant surface. Plug the cord into the outlet.
1) Unlock LID by depressing LID RELEASE BUTTON.
2) To remove FRYING BASKET, pull HANDLE up until it clicks into horizontal position. Pour
cooking oil into OIL POT, making sure oil level must be between the „MIN“and „MAX“.
3) Smear a little oil on the inside of the VIEWING WINDOW. This prevents condensation, which
impedes the view.
4) Place FRYING BASKET into fryer and lower into oil. To unlock HANDLE, slide HANDLE LOCK
RELEASE towards you and fold HANDLE back towards fryer exterior. Close LID.
5) Make sure that fryer is off and insert plug into power socket. Turn fryer on by pressing power
switch to position „I“ The POWER light P11 will ligh on. Turn ADJUSTABLE THERMOSTAT to
the desired temperature. The TEPM LIGHT will light off when the set temperature is reached.
6) Raise FRYING BASKET, then open LID.
7) Place food to be cooked in FRYING BASKET, close LID and lower handle.
CAUTION: Remove any excess ice crystal on frozen foods before placing in basket.
8) Cook according to the Frying Chart or your favorite recipe.
9) Raise FRYING BASKET and open LID. To remove excess grease and retain crispness, let
food drain in FRYING BASKET, then lift FRYING BASKET by HANDLE and pour contents
onto plate covered with paper towels before serving.
CLEANING
WARNING: ALWAYS TURN POWER SWITCH TO „O“ THEN DISCONNECT PLUG FROM
WALL OUTLET.
1) Switch unit off
2) Unplug from outlet and allow unit to cool completely.
3) Clean the outside of the fryer and LID with a damp cloth.
Caution: Do not use abrasive pads or alcohol.
4) Remove FRYING BASKET. Wash the FRYING BASKET in hot soapy water. Rinse and towel
dry carefully.
5) Store your fryer with the LID closed to preserve the oil.
6) When changing the oil, take the opportunity to clean the inside of the fryer.Remove LID, pour
out oil and discard properly.
CAUTION:
Never immerse the plastic exterior of the fryer in water, or wash in running water.
REMOVE AND REPLACE LID
CAUTION: Only remove lid when unit is cool. To remove lid, depress LID RELEASE BUTTON and
lift LID to a vertical positoin (fig. 1). Remove LID by pulling firmly upwards. Reverse the sequence
to secure lid back into position. Be sure to push down firmly on lid from the vertical position to
secure back in place. When replacing LID, the spring on LID must be inserted down in front of the
metalclip that is located on the fryer housing.