![background image](http://html.mh-extra.com/html/hyundai/bs-221/bs-221_instruction-manual_2196418021.webp)
ENG - 21
ENG
DESCRIPTION Of ThE CONTROLS
P1
LID
P2 ROLL COMPARTMENT
P3
SEALING WIRE
P4
VACUUM NOZZLE
P5
SEAL INDICATOR LIGHT (GREEN )
P6
VACUUM INDICATOR LIGHT ( RED )
OPERATING yOUR VACUUM SEALER
TO MAKE A BAG
Place the unit on a firm ,level surface near an electrical outlet.
Insert the roll of bagging material in the roll compartment in the sealer. We recommend you
use only the plastic material supplied by seller.
Plug into an AC electrical outlet.
When starting a new roll, remove the sticker from the outside of the roll. Pull the bagging
material to the desired bag past the sealing wire.
NOTE: The roll is folded into a double layer.
Close the lid and press down equally on both the left and right sides of the lid. Both Indica
-
tor lights will light up. In about 6 seconds the green ‘Seal’ indicator light will go out and the
seal is complete.
NOTE: When closing the lid and applying pressure, two distinct clicks will be heard. These
are the switches which operate the two functions of the bag sealer.
When the green ‘Seal’ light goes out, peel the finished bag off the wire, ensuring no bagging
material adheres to the sealing wire. Now you have a bag sealed on three sides ready to be
filled and vacuum sealed.
NOTE: The bottom of the bag is where the white label strip it.
1)
2)
3)
4)
5)
6)
Summary of Contents for BS 221
Page 26: ...Poznámky Notatka Notes ...
Page 27: ...Poznámky Notatka Notes ...
Page 28: ...Seoul Korea ...