![background image](http://html1.mh-extra.com/html/hyundai/acb90g5an/acb90g5an_user-manual_2195899019.webp)
• In order to play the iPod by operating the
keys, you must use the dedicated iPod cable
(the cable that is supplied when purchasing
iPod/iPhone products).
※
During ACC ON state, connecting the iPod
through the iPod cable (the cable that is
supplied when purchasing iPod/iPhone
products), the iPod will be charged through the
head unit.
• When connecting with the iPod cable, make
sure to fully insert the jack to prevent
communication interference. If the iPod is
connected to the vehicle while it is playing, a
high pitch sound could occur for approximately
1-2 seconds immediately after connecting. If
possible, connect the iPod to the vehicle with
the iPod stopped/paused.
• Within the iPhone, the streaming audio
feature and iPod control features may conflict.
If problems persist, remove the iPhone and
connect again.
• Some iPods may not sync with the System
depending on its version. If the Media is
removed before the Media is recognized, then
the system may not properly restore the
previously operated mode. (iPad charging is
not supported.)
(iPod is a registered trademark of Apple Inc.)
•
In order to use the iPod while operating the
keys, you must use a dedicated iPod cable.
(the cable that is supplied when purchasing
iPod/iPhone products)
•
During ACC ON state, connecting the iPod
through the iPod cable (the cable that is
supplied when purchasing iPod/iPhone
products), will charge the iPod through the
head unit.
•
When connecting with the iPod cable, make
sure to fully insert the jack to prevent
communication interference.
•
When the EQ features of an external device,
such as the iPod, and the audio system are
both active, EQ effects could overlap and
cause sound deterioration and distortion.
Whenever possible, turn off the EQ feature
within the external device upon use by
connecting with the audio system.
•
Noise may occur when an iPod or AUX
device is connected. When such devices are
not being used, disconnect the device for
storage.
•
When the iPod or AUX device power is
connected to the power jack, playing the
external device may result in noise. In such
cases, disconnect the power connection
before use.
iPod Mode
•
Skipping or improper operation may occur
depending on the characteristics of your
iPod/Phone device.
•
If your iPhone is connected to both the
Bluetooth® and USB, the sound may not be
properly played. In your iPhone, select the
Dock connector or Bluetooth® to change the
sound output (source).
• iPod mode cannot be operated when the
iPod cannot be recognized due to the playing
of versions that do not support communication
protocols, cases of iPod abnormalities and
defects.
• For fifth generation iPod Nano devices,
the iPod may not be recognized when the
battery level is low. Please charge the iPod for
use.
• Search/play orders shown within the iPod
device may differ with the orders shown within
the audio system.
• If the iPod malfunctions due to an iPod
device defect, reset the iPod and try again. (To
learn more, refer to your iPod manual)
Using iPod Devices
2 Audio