7-25
After checking that the fuse is not blown and that there is no disconnection in the wiring
After checking that the fuse is not blown and that there is no disconnection in the wiring
harness, replace the lamp bulb.
harness, replace the lamp bulb.
LAMP BULBS REPLACEMENT
LAMP BULBS REPLACEMENT
10)
10)
D507OM14
FUNCTIONAL TESTS
FUNCTIONAL TESTS
You will start the engine to complete the functional tests, so be sure that:
·
The parking brake is applied.
·
Gear selector lever is in NEUTRAL.
·
Forks are fully lowered to the floor or ground.
·
All controls are in neutral or other correct position.
·
You are familiar with the safety procedures given in section 5, Starting and operating
Starting and operating
procedures
procedures, in this manual.
As you test the following components, be sure they are properly mounted and working correctly.
Horn
Horn
Press the horn button to check horn function. If the horn or any other part does not operate,
report the failure and have it repaired before the truck is put into operation.
Hour meter
Hour meter
Start the engine and let it warm up until it runs evenly and accelerates smoothly when you push
on the accelerator pedal. Check the hour meter for operation with the engine running. Write the
hour meter reading on the PM report form. Report any malfunction or damage.
(1)
(1)
(2)
(2)
11)
11)
Indicator lights
Indicator lights
Check that all lights are functioning and indicate normal truck operation as described in section 3,
Know your truck
Know your truck, in this manual.
(3)
(3)
Lamp
Spec (24V)
Head lamp
70W
Turn signal lamp
21W
Clearance lamp
10W
Stop lamp
21W
Backup lamp
10W
Warning lamp
1.4W
Meter lighting lamp
3.4W
License lamp (option)
3W
Beacon lamp (option)
Strobe type
Rear work lamp
70W