Hyundai 2012 Sonata Owner'S Manual Download Page 223

Page: 223 / 411

4 141

Features of your vehicle

MENU : MP3 CD / USB

Press the CD MP3 mode

key to

set the Repeat, Folder Random, Folder
Repeat, All Random, Information, and
Copy features.

Repeat

Press the

key Set [

RPT]

through the

TUNE knob or

key to repeat the current song.

❈

Press RPT again to turn off.

Folder Random

Press the

key Set [

F.RDM]

through the

TUNE knob or

key to randomly play songs within the
current folder.

❈

Press F.RDM again to turn off.

Folder Repeat

Press the

key Set [

F.RPT]

through the

TUNE knob or

key to repeat songs within the cur-
rent folder.

❈

Press F.RPT again to turn off.

All Random

Press the

key Set [

A.RDM]

through the

TUNE knob or

key

to randomly play all songs within the
CD.

❈

Press A.RDM again to turn off.

Information

Press the

key Set [

Info]

through the

TUNE knob or

key to display information of the cur-
rent song.

❈

Press the

key to turn off info

display.

Copy

Press the

key Set [

Copy]

through the

TUNE knob or

key.

This is used to copy the current song

into My Music. You can play the copied
Music in My Music mode.

❈

If another key is pressed while copying
is in progress, a pop up asking you
whether to cancel copying is dis-
played.

❈

If another media is connected or
inserted (USB, CD, iPod, AUX) while
copying is in progress, copying is can-
celed.

❈

Music will not be played while copying
is in progress.

Summary of Contents for 2012 Sonata




























































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sonata

Reviews:

Hyundai 2012 Sonata, Owner'S Manual, Page: 223 / 411

Search results

Summary of Contents for 2012 Sonata

Reviews: