Hyundai 2012 Sonata Owner'S Manual Download Page 198

Page: 198 / 411

Features of your vehicle

116

SOUND SETTINGS

Press the

key Select [Sound]

through

TUNE knob or

key

Select menu through

TUNE knob

Sound Settings

This menu allows you to set the ‘Bass,
Middle, Treble’ and the Sound Fader and
Balance.

Select [Sound Settings] Select
menu through

TUNE knob Turn

TUNE knob left/right to set

• Bass, Middle, Treble : Selects the sound

tone.

• Fader, Balance : Moves the sound fader

and balance.

• Default : Restores default settings.

❈

Back : While adjusting values, re-
pressing the

TUNE knob will

restore the parent menu.

Variable EQ (AC240IN Only)

This is a premium sound system feature in
which the acoustical mode can be select-
ed according to musical preferences.

Select [Variable EQ] Set menu
through

TUNE knob

• Innocente(Normal) : Natural sound,

sound optimized for driver.

•

Forza(Dynamic) :

Powerful sound

emphasizing bass, stereo sound.

• Concerto(Concert) : Sound similar to a

concert or live hall

❈

May differ depending on the selected
audio.

SETUP

Summary of Contents for 2012 Sonata




























































































































































































































































































































































































































Search results

Summary of Contents for 2012 Sonata

Reviews:

Hyundai 2012 Sonata, Owner'S Manual, Page: 198 / 411

Search results

Summary of Contents for 2012 Sonata

Reviews: