Hyundai 2010 Veracruz Owner'S Manual Download Page 355

Page: 355 / 425

Maintenance

ENGINE OIL

G060100AEN-EU

Checking the engine oil level

1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach

normal operating temperature.

3. Turn the engine off and wait for a few

minutes (about 5 minutes) for the oil to
return to the oil pan.

4. Pull the dipstick out, wipe it clean, and

re-insert it fully.

5. Pull the dipstick out again and check

the level. The level should be between
F and L.

If it is near or at L, add enough oil to bring
the level to F.

Do not overfill.

Use a funnel to help prevent oil from
being spilled on engine components.

Use only the specified engine oil. (Refer
to “Recommended lubricants and capaci-
ties” in section 8.)

WARNING -

Radiator hose

Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may be
hot enough to burn you.

OEN076002N

OEN076003N

CAUTION

Do not overfill with engine oil.
Engine damage may result.

Summary of Contents for 2010 Veracruz










































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Veracruz

Reviews:

Related manuals for 2010 Veracruz

Brands by name

Popular brands

Hyundai 2010 Veracruz, Owner'S Manual

Search results

Summary of Contents for 2010 Veracruz

Reviews:

Related manuals for 2010 Veracruz

Brands by name

Popular brands