manualshive.com logo in svg

Hyundai 2010 Veracruz, Owner'S Manual

The Hyundai 2010 Veracruz Owner's Manual is a comprehensive guide that provides detailed information about the vehicle's features and maintenance. Available for free download, this manual is a must-have resource for every Veracruz owner. Get your copy now at manualshive.com, ensuring hassle-free access to essential driving information.

Share
Download
background image

Driving your vehicle

20

5

E170400AEN

E170600AEN-EU

E170700AEN-EU

• Full-time AWD vehicles must be tested

on a special four wheel chassis
dynamometer.

✽

✽

NOTICE

Never engage the parking brake while
performing these tests.

• An AWD vehicle should not be tested

on a 2WD drive roll tester. If a 2WD roll
tester must be used, perform the fol-
lowing:

1. Check the tire pressures recommend-

ed for your vehicle.

2. Place the front wheels on the roll

tester for a speedometer test as shown
in the illustration.

3. Release the parking brake.
4. Place the rear wheels on the tempo-

rary free roller as shown in the illustra-
tion.

WARNING - 

Dynamometer
testing

Keep away from the front of the
vehicle while the vehicle is in gear
on the dynamometer. This is very
dangerous as the vehicle can jump
forward and cause serious injury or
death.

WARNING - 

Jacked vehicle

While the full-time AWD vehicle is
being raised on a jack, never start
the engine or cause the tires to
rotate.
There is the danger that rotating
tires touching the ground could
cause the vehicle to go off the jack
and to jump forward.

OCM051013

Roll tester (speedometer)

Temporary free roller

WARNING

Your vehicle is equipped with tires
designed to provide for safe ride
and handling capability. Do not use
a size and type of tire and wheel
that is different from the one that is
originally installed on your vehicle.
It can affect the safety and perform-
ance of your vehicle, which could
lead to handling failure or rollover
and serious injury. When replacing
the tires, be sure to equip all four
tires with the tire and wheel of the
same size, type, tread, brand and
load-carrying capacity. If you never-
theless decide to equip your vehi-
cle with any tire/wheel combination
not recommended by HYUNDAI for
off road driving, you should not use
these tires for highway driving.

Summary of Contents for 2010 Veracruz










































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Veracruz

Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
I.D. Systems Vehicle Asset Communicator User Manual preview
Vehicle Asset Communicator
Brand: I.D. Systems Pages: 41
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
RAM Promaster 2016 User Manual preview
Promaster 2016
Brand: RAM Pages: 148
Hamron 619-626 User Instructions preview
619-626
Brand: Hamron Pages: 36
Kia Optima 2004 Owner'S Manual preview
Optima 2004
Brand: Kia Pages: 233
Mercedes-Benz ML 320 CDI Operator'S Manual preview
ML 320 CDI
Brand: Mercedes-Benz Pages: 585
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
GMC 2008 Savana Van Owner'S Manual preview
2008 Savana Van
Brand: GMC Pages: 402
Ford C-Max Energi 2014 Quick Reference Manual preview
C-Max Energi 2014
Brand: Ford Pages: 10
Velleman CAMSET28 User Manual preview
CAMSET28
Brand: Velleman Pages: 17
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Brand: Road Ranger Pages: 3
Van Guard IN8377 Fitting Instructions Manual preview
IN8377
Brand: Van Guard Pages: 12
Saab 900 1983 Owner'S Manual preview
900 1983
Brand: Saab Pages: 64

Brands by name

Popular brands

Load more brands