Hyundai 2008 Elantra Owner'S Manual Download

Page: 90 / 360

4 17

Features of your vehicle

Power window lock button

• The driver can disable the power win-

dow switches on a passenger door by
depressing the power window lock
switch located on the driver’s door to
LOCK (pressed).

• When the power window lock switch

is ON, the driver’s master control
cannot operate the passenger door
power windows.

Manual windows (if equipped)

To raise or lower the window, turn the
window regulator handle clockwise or
counterclockwise.

OHD046010

WARNING

When opening or closing the win-
dows, make sure your passenger's
arms, hands and body are safely
out of the way.

B050A01E

WARNING

• Passengers can be injured if their

head, hands or other body parts
are trapped by a closing window.
Always check for obstructions
before raising any window.

• NEVER leave the ignition key in

the vehicle.

• NEVER leave any child unattend-

ed in the vehicle.

Even very

young children may inadvertently
cause the vehicle to move, entan-
gle themselves in the windows,
or otherwise injure themselves or
others.

Summary of Contents for 2008 Elantra









































































































































































































































































































































































Search results

Summary of Contents for 2008 Elantra

Reviews:

Related manuals for 2008 Elantra

Brands by name

Popular brands

Hyundai 2008 Elantra, Owner'S Manual

Search results

Summary of Contents for 2008 Elantra

Reviews:

Related manuals for 2008 Elantra

Brands by name

Popular brands