background image

4 23

Features of your vehicle

If your vehicle is equipped with this fea-
ture, you can slide or tilt your sunroof
with the sunroof control buttons located
on the overhead console.
1. Slide button
2. Tilt button
3. Close button

The sunroof can only be opened, closed,
or tilted when the ignition switch is in the
ON position.

NOTICE

In cold and wet climates, sunroof may

not work properly due to freezing con-

ditions.

NOTICE

After washing the car or after there is

rain, be sure to wipe off any water that

is on the sunroof before operating it.

NOTICE

The sunroof cannot slide when it is in

the tilt position nor can it be tilted while

in an open or slide position. 

SUNROOF (IF EQUIPPED)

OHD046016

CAUTION

Do not continue to press the sun-
roof control button(s) after the sun-
roof is in the fully open, closed, or
tilt position(s). Damage to the motor
or system components could occur.

WARNING 

Never adjust the sunshade while
driving. This could result in loss of
control and an accident that may
cause death, serious injury, or
property damage.

Summary of Contents for 2008 Elantra









































































































































































































































































































































































Reviews: