manualshive.com logo in svg

Hyundai 2006 Tucson, Owner'S Manual

The 2006 Hyundai Tucson Owner's Manual is a comprehensive guide that provides valuable information and instructions for operating and maintaining your Hyundai Tucson. Download this manual for free from manualshive.com, ensuring that you have all the necessary details to maximize your Tucson's performance and longevity.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

22

!

NOTE:

Although the combination retractor pro-
vides the same level of protection for seated
passengers in either emergency or auto-
matic locking modes, it is recommended
that seated passengers use the emergency
locking feature for improved convenience.
The automatic locking function is intended
to facilitate child restraint installation. To
convert from the automatic locking feature
to the emergency locking operation mode,
allow the unbuckled seat belt to fully re-
tract.

WARNING:

o For maximum restraint system protec-

tion, the seat belts must always be used
whenever the car is moving.

o Seat belts are most effective when

seatbacks are in the upright position.

o Children age 12 and younger must al-

ways be properly restrained in the rear
seat.  Never allow children to ride in the
front passenger seat.  If a child over 13
must be seated in the front seat, he/she
must be properly belted and the seat
should be moved as far back as possible.

o Never wear the shoulder belt under your

arm or behind your back.  An improperly
positioned shoulder belt can cause se-
rious injuries in a crash.  The shoulder
belt should be positioned midway over
your shoulder across your collarbone.

o Avoid wearing twisted seat belts. A

twisted belt can't do its job as well. In a
collision, it could even cut into you. Be
sure the belt webbing is straight and not
twisted.

o Be careful not to damage the belt web-

bing or hardware. If the belt webbing or
hardware is damaged, replace it.

!

WARNING:

You should place the lap belt portion as low
as possible and snugly across your hips,
not on your waist. If the lap belt is located
too high on your waist, it may increase the
chance of injury in the event of a collision.
Both arms should not be under or over the
belt. Rather, one should be over and the
other under, as shown in the illustration.
Never wear the seat belt under the arm
nearest the door.

!

B200A01A-AAT

Adjusting Your Seat Belt

B200A01L

WARNING:

Summary of Contents for 2006 Tucson


































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Tucson

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Jeep Liberty Quick Reference Manual preview
Liberty
Brand: Jeep Pages: 6
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Edelbrock Chevrolet 5783 Installation Instructions preview
Chevrolet 5783
Brand: Edelbrock Pages: 1
FORM FIT 1308 Installation Instructions preview
1308
Brand: FORM FIT Pages: 2
Chevrolet 2013 Spark Specifications preview
2013 Spark
Brand: Chevrolet Pages: 2
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Waeco MagicWatch MWE250 Installation And Operating Manual preview
MagicWatch MWE250
Brand: Waeco Pages: 172
RAM 2012 Truck Chassis cab Owner'S Manual preview
2012 Truck Chassis cab
Brand: RAM Pages: 506
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
Car-Systems Parktronic system Volkswagen Golf MK7 Assembly Manual preview
Parktronic system Volkswagen Golf MK7
Brand: Car-Systems Pages: 10
KEKO K617 Installation Description preview
K617
Brand: KEKO Pages: 3
Movon MDAS-5 Installation Manual preview
MDAS-5
Brand: Movon Pages: 43

Brands by name

Popular brands

Load more brands