manualshive.com logo in svg

Hyundai 2006 Tucson, Owner'S Manual

The 2006 Hyundai Tucson Owner's Manual is a comprehensive guide that provides valuable information and instructions for operating and maintaining your Hyundai Tucson. Download this manual for free from manualshive.com, ensuring that you have all the necessary details to maximize your Tucson's performance and longevity.

Share
Download
background image

3

WHAT TO DO IN AN EMERGENCY

5

TIRE PRESSURE MONITORING SYS-
TEM (TPMS)

C320A01JM

C320A01JM-AAT

(If installed)

➀

 Low Tire Pressure Telltale

➁

 TPMS Malfunction Indicator

Each tire, including the spare (if in-
stalled), should be checked monthly
when cold and inflated to the inflation
pressure recommended by the vehicle
manufacturer on the vehicle placard or
tire inflation pressure label.  (If your
vehicle has tires of a different size than
the size indicated on the vehicle plac-
ard or tire inflation pressure label, you
should determine the proper inflation
pressure for those tires.)

As an added safety feature, your ve-
hicle has been equipped with a Tire
Pressure Monitoring System (TPMS)
that illuminates a low tire pressure tell-
tale when one or more of your tires is
significantly under-inflated.  Accord-
ingly, when the low tire pressure telltale
illuminates, you should stop and check
your tires as soon as possible, and
inflate them to the proper pressure.
Driving on a significantly under-inflated
tire causes the tire to overheat and can
lead to tire failure.  Under-inflation also
reduces fuel efficiency and tire tread
life, and may affect the vehicle’s han-
dling and stopping ability.

Please note that the TPMS is not a
substitute for proper tire maintenance,
and it is the driver’s responsibility to
maintain correct tire pressure, even if
under-inflation has not reached the level
to trigger illumination of the TPMS low
tire pressure telltale.

Your vehicle has also been equipped
with a TPMS malfunction indicator to
indicate when the system is not operat-
ing properly.  The TPMS malfunction
indicator is provided by a separate tell-
tale, which displays the symbol "TPMS"
when illuminated.  When the malfunc-
tion indicator is illuminated, the system
may not be able to detect or signal low
tire pressure as intended.  TPMS mal-
functions may occur for a variety of
reasons, including the installation of
replacement or alternate tires or wheels
on the vehicle that prevent the TPMS
from functioning properly.  Always check
the TPMS malfunction indicator after
replacing one or more tires or wheels on
your vehicle to ensure that the replace-
ment or alternate tires and wheels allow
the TPMS to continue to function prop-
erly.

Summary of Contents for 2006 Tucson


































































































































































































































































































Reviews:

No comments

Related manuals for 2006 Tucson

JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Waeco MagicWatch MWE800 Installation And Operating Manual preview
MagicWatch MWE800
Brand: Waeco Pages: 212
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
SAN HIMA SH-TENT-SY20 User Manual preview
SH-TENT-SY20
Brand: SAN HIMA Pages: 7
Paccar Peterbilt SmartAir Operator'S Manual preview
Peterbilt SmartAir
Brand: Paccar Pages: 58
Mercedes-Benz 300 SL Operator'S Manual preview
300 SL
Brand: Mercedes-Benz Pages: 153
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Subaru Legacy 2011 Quick Reference Manual preview
Legacy 2011
Brand: Subaru Pages: 19
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14

Brands by name

Popular brands

Load more brands