manualshive.com logo in svg

Hyundai power products HYTD300, Instruction Manual

Share
Download
Hyundai power products HYTD300 Instruction Manual Download Page 36

  36

STEP 1

Use the tipping handle to tip the hopper and 
set it on the blocks or supports rated for the 
weight of the box.

Maintenance & Care

STEP 2

Loosen locknut A.

STEP 3

Tighten bolt B until the correct tightness is 
restored.

STEP 4

Secure bolt B by tightening lockout A 
thoroughly.

STEP 5

Return the hopper to its original position.

      

Do not over-tighten your track. The 

adjustment of the track and the brakes are 
linked. The braking power will lessen the 
more the track is tightened.

!

      

If the adjustment bolt has no more 

adjustment left, the tracks may have to be 
replaced.

!

Replacing Drive Belt

STEP 1

Lift up the hopper and insert a support rod for 
safety purposes.

Check the condition of the tracks periodically. 
If any tack is cracked or frayed, it should be 
replaced as soon as convenient.

STEP 2

Lift the machine and set it on blocks or
supports rated for the weight of the machine 
so that the tracks are approximately 4” off the 
ground.

Summary of Contents for HYTD300

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands