Hyundai power products HYTD300, Instruction Manual

Page: 22 / 48

22
Features
Gas Selection Lever
The gear selection lever has 4 positions: 3
forward speeds and 1 reverse. To change
speeds, move the speed shift lever to the
desired position. The lever locks in a notch at
each speed selection.
Slower speeds are for heavier loads, while
faster speeds are for transporting light loads or
an empty hopper. It is recommended that you
use a slower speed until you are familiar with
the operation of the machine.
If the engine slows down under a load or the
tracks slip, shift the machine into a lower gear.
If the front of the machine rides up, shift the
machine into a lower gear. If the front
continues to ride up, lift up on the handles.
Left/Right Steering Lever
Operate the lever to turn left/right.
Operate the steering levers only at a
reduced speed.
!
Gas Spring Assistance
The gas spring assistance provides support
when lifting and lowering the hopper.
Engine On/Off Switch
The engine switch has two positions. OFF -
engine will not start or run. ON - engine will
start and run.
Recoil Starter Handle
The recoil starter handle is used to start the
engine.
Fuel Shut-Off Valve
The fuel shut-off has two positions:
CLOSED ( ) - Use this position to service,
transport, or to store the unit.
OPEN ( ) - Use this position to run the unit.