manualshive.com logo in svg

Hyundai power products HYMD500, Instruction Manual

Share
Download
Hyundai power products HYMD500 Instruction Manual Download Page 24

  24

Starting Procedure

      

CAUTION -

 For OUTDOOR use ONLY.

Petrol machines produce carbon monoxide – 
a poisonous, colourless and odourless gas that 
can cause serious injury or death. Petrol is 
highly flammable, always handle with extreme 
care and in a well ventilated area.

      

NOTE -

 This machine is shipped without fuel 

and oil and MUST be filled before use. Failure to 
do so may cause damage to the engine that will 
not be covered by warranty.

       

CAUTION! ALL FUELS ARE FLAMMABLE

Always fuel and de-fuel in a well ventilated area 
away from sources of ignition.

!

!

Starting Procedure

STEP 1

Move the engine switch to the ON position.

STEP 2

Open the fuel shut-off valve.

STEP 3

Move the choke lever to the CLOSED position.
If the engine is hot, closing the choke is not 
necessary.

STEP 4

Move the throttle lever slightly to the FAST 
speed.

STEP 5

Pull the recoil starter until the engine starts. 
Return the recoil to the home position after 
each pull. Repeat the steps as needed. Once 
engine has started, set the throttle to the FAST 
position before you operate the unit.

Summary of Contents for HYMD500









































Reviews:

No comments

Brands by name

Popular brands

Load more brands