manualshive.com logo in svg

Hyundai power products HYMD500, Instruction Manual

Share
Download
Hyundai power products HYMD500 Instruction Manual Download Page 22

  22

Preparation

Add Oil To Engine

      

CAUTION!

Failure to fill engine sump with oil before 
starting engine will result in permanent 
damage and void warranty. Running the 
engine with low oil level will cause serious 
engine damage.

!

STEP 1

Remove the oil filler cap and wipe the 
dipstick clean.

STEP 3

Refit the dipstick without screwing it down.
Remove the dipstick and check the oil level. It 
should be up to the full mark of the dipstick.

STEP 4

If the level is low, use a funnel and fill with the 
recommended oil to the middle of the dipstick. 
DO NOT overfill.

STEP 5

Once the correct amount of oil has been 
added, refit the dipstick securely.

      

DO NOT OVERFILL

Check engine oil level daily and add as 
needed.

!

       THE MACHINE IS SHIPPED 
WITHOUT OIL. DO NOT START THE 
ENGINE BEFORE ADDING OIL.

!

Make sure the machine is on a flat, level 
surface.

STEP 2

Add Petrol To Engine

!

      

WARNING!

 Petrol is extremely flammable 

and is explosive under certain conditions.
Refuel in a well-ventilated area with the 
engine stopped. Do not smoke or allow flames 
or sparks in the area where the engine is 
refuelled or the petrol is stored. You can be 
burned or seriously injured when handling fuel. 
Use extreme care.

       

CAUTION! ALL FUELS ARE FLAMMABLE

Always fuel and de-fuel in a well ventilated area 
away from sources of ignition.

STEP 1

The engine must be off and allowed to cool 
down completely before adding fuel.

STEP 2

Remove the fuel filler cap. Fill the fuel tank 
with fresh straight unleaded petrol. Allow a 
25mm gap from the top of the tank. DO NOT 
mix petrol with oil.

      IMPORTANT! DO NOT OVERFILL!

This equipment and/or its engine may include 
evaporative emissions control system 
components, required to meet EPA and/
or CARB regulations, that will only function 
properly when the fuel tank has been filled to 
the recommended level. Overfilling may cause 
permanent damage to evaporative emissions 
control system components. Filling to the 
recommended level ensures a vapor gap 
required to allow for fuel expansion. Pay close 
attention while filling the fuel tank to ensure 
that the recommended fuel level inside the 
tank is not exceeded. Use a portable petrol 
container with an appropriately sized 
dispensing spout when filling the tank. Do not 
use a funnel or other device that obstructs the 
view of the tank filling process.

!

Summary of Contents for HYMD500









































Reviews:

No comments

Brands by name

Popular brands

Load more brands