background image

Safety Information

   13

www.hyundaipowerproducts.co.uk

01646 687 880

[email protected]

Personal Protective Equipment

!

HAND PROTECTION MUST BE WORN 

Protective electrically non-conductive gloves are highly recommended when working.

HEARING PROTECTION MUST BE WORN

Suitable safety hearing protection is recommended.

EYE PROTECTION MUST BE WORN 

Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses have
only impact resistant lenses; they are not safety glasses/goggles.

FOOT PROTECTION MUST BE WORN 

Non-skid heavy duty footwear are highly recommended when working.

PROTECTIVE CLOTHING MUST BE WORN 

Do not wear loose clothing, gloves, scarfs, neckties or jewellery
(rings, wrist watches), which can be caught in moving parts.

HEAD PROTECTION MUST BE WORN 

Wear a safety helmet with a safety visor.

FACE SHIELD MUST BE WORN 

Wear a face shield to protect your face.

RESPIRATOR MUST BE WORN 

Wear a respirator.

Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when 
operating or repairing the machine. No protective equipment can ensure 100%
protection.

When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. If 
more than one item of PPE is worn at the same time, make sure they can be used together, e.g. 
wearing safety glasses may disturb the seal of a respirator, causing air leaks.

Summary of Contents for HYM3300E

















































Reviews: