22
7.54
7.55
7.56
7.57
Should the wood chipper stall through overloading or clogging, turn the ignition
switch to the off position and wait until the cutting disc has completely stopped.
Remove the spark plug HT lead cap.
Open the housing cover to clear and remove all the materials from the housing.
Lock the housing cover, reinstall the spark plug HT lead cap and start the machine
again.
To remove blockages,
DO NOT
under any circumstances use your hands.
STOP
and disable the machine then undo the chutes.
Remove the feed and discharge chutes by undoing the securing bolts.
Carefully rotate the blades in both directions until the machine is free of
materials which have become stuck.
As the discharge materials pile up, move the chipper or the material to keep the
outlet free.
DO NOT
position the deflector horizontally as it will reduce the airflow, impeding
discharge and cause a blockage.
To reduce stress on the engine when wood chipping is not being performed, set the
throttle control lever to its
SLOW
position.
Lowering the engine speed to idle will help extend the life of the engine, as well as
conserve fuel and reduce the noise level of the machine.
DO NOT
feed wood into the exit shoot.
7.5
8
