- 12 -
5. Clean the air filter elements if they are to be reused.
Paper air filter element: Tap the filter element several times on a hard surface to
remove dirt.
Never try to brush off dirt; brushing will force dirt into the fibers.
Foam air filter element: Clean in warm soapy water, rinse, and allow to dry
thoroughly.
Dip the filter element in clean engine oil, then squeeze out all excess oil.
6. Wipe dirt from the inside of the air cleaner base and cover, using a moist rag.
7. Place the foam air filter element over the paper element, and reinstall the
assembled air filter. Be sure the gasket is in place beneath the air filter. Tighten the air
filter wing nut securely.
8. Install the air cleaner cover, and tighten the cover wing nut securely.
SEDIMENT CUP CLEANING
1. Move the fuel valve to the
OFF
position, then remove the fuel sediment cup and
O-ring.
2. Wash the sediment cup and O-ring in
nonflammable solvent, and dry them thoroughly.
3. Place the O-ring in fuel valve, and install the
sediment cup. Tighten the sediment securely.
4. Move the fuel valve to the
ON
position, and
check for leaks. Replace the O-ring if there is any
leakage.
SPARK PLUG SERVICE
Recommended spark plug: F6RTC
1. Disconnect the spark plug cap, and remove
any dirt from around the spark plug area.
2. Remove the spark plug with a spark plug
wrench.
3. Inspect the spark plug. Replace it if the
electrodes are worn, or if the insulator is cracked or chipped.
