9
Clamp blade assembly in a vice and file the exposed cutting surface of each blade tooth with a 203
mm (8 inch) smooth round file, 6.4 mm (1/4 inch) or 5.6mm (7/32 inch) diameter. Be sure to retain the
original angle of tooth when filing.
Re move the hedge trimmer from the vice, replace battery pack and restart the hedge trimmer. Allow
the blades of the hedge trimmer to come to a stop so that the unsharpened edges of the cutter blade
teeth are exposed.
Remove battery pack from hedge trimmer and repeat the sharpening procedure as described above.
HEDGE TRIMMER LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade lubricant for the life
of the unit under normal operating procedures. Therefore, no further lubrication is required.
WARNING
Do not attempt to modify this unit or create or mount any accessory not specifically recommended in
this manual for use with this hedge trimmer. Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious personal injury.
WARNING
Examine hedge trimmer frequently to assure all parts are unbroken and securely attached. Make sure
all screws and fasteners are securely tightened to prevent the risk of serious personal injury.
CLEANING THE HEDGE TRIMMER
To prevent serious personal injury, remove the battery pack before servicing, cleaning, or removing
material from the unit.
Remove the battery pack.
Clean the unit using a damp cloth with a mild detergent.
Do not use any strong detergents on the plastic housing or the handle. They can be damaged by
certain aromatic oils such as pine and lemon, and by solvents such as kerosene.
Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth.
Use a small brush or the air discharge of a small vacuum cleaner brush to clean the air vents on the
battery pack housing and motor housing.
Keep the air vents free of obstructions.
STORING THE HEDGE TRIMMER
Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer in a dry, well-ventilated
place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and
de-icing salts.
Always place blade cover on cutting blades before storing.
Store and charge your batteries below in a cool area. Temperatures above or below normal room
temperature will shorten battery pack life.
