and 2.1091
because the radio
of the time, or less, is important
Transmit no more than the rated duty factor of 50% of the time.
Antenna Installation: install the antenna at least 45cm away
Gain of antenna must not exceed 5.5dBi.
2
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Compliance with RF Exposure Standards
Hytera's radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1:2005; Canada RSS102 Issue 5 March 2015
Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure limits in
the above standards and guidelines, users should always adhere to the followings:
from your body, in accordance with the requirements of the
antenna manufacturer/supplier.
Guidelines:
Do not remove the RF Exposure Label from the device.
User awareness instructions should accompany device when transferred to other users.
Do not use this device if the operational requirements described herein are not met.
generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
Transmitting 50%
