17
(RBM)
Slot 1 TX Indicator glows red
Repeater transmitting (analog) / repeater
transmitting on slot 1 (digital)
Slot 1 TX Indicator flashes red
Busy channel lockout
*
/ transmission time-out
*
Slot 2 TX Indicator glows red
Repeater transmitting on slot 2 (digital)
Slot 2 TX Indicator flashes red
Busy channel lockout
*
/ transmission time-out
*
Slot 1 RX Indicator glows green
Repeater receiving (analog) / repeater receiving
on slot 1 (digital)
Slot 1 RX Indicator flashes green
Monitoring
*
Slot 2 RX Indicator glows green
Repeater receiving on slot 2 (digital)
Analog Mode Indicator glows yellow
Repeater operating in analog mode
Digital Mode Indicator glows blue
Repeater operating in digital mode
Basic Operations
Turning the Repeater On/Off
Connect the repeater to a DC source to turn the repeater on. At this time, the Power
Indicator glows green and the repeater shows the power-up screen.
To turn the repeater off, disconnect it from the DC source.
Adjusting the Volume
When the repeater operates in analog mode, rotate the
Volume Control
knob clockwise
to increase the volume of speaker output audio, or counter-clockwise to decrease the
volume.
When the repeater operates in digital mode, the speaker cannot output audio, and no
