z
Full-duplex Individual Call
¾
If it is an incoming call with Direct Signaling, there will be an alert tone to inform the called party
that a call is received.
¾
If it is an incoming call with Hook Signaling, the terminal sounds alert and vibrates to inform the
called party that there is an incoming call. And to receive the call, press the
PTT
key,
Func/OK
key or
.
After the call is established, both parties can talk at any time, with no need to use any key.
Hanging up/ Rejecting an Individual Call
When initiating the individual call, press
or
Options/Back
key to terminate it. In the presence of an
incoming individual call, press the
Options/Back
key or
to reject it. In the presence of an
individual call, any party can press
to terminate it.
7.1.2
Group Call
Initiating a Group call
In the home screen, you can initiate a group call to the default group by pressing
PTT
key. To call other
groups, please do as follows:
1.
In the home screen, rotate the
Group Call Selector
knob to select a group. Please perform this
step as soon as the icon
appears; otherwise, you may fail to select.
2.
Press the
Func/OK
key to confirm your selection.
3.
Press
PTT
to initiate a group call to this group.
Answering a Group Call
You can receive a group call without any operation. To take the talk rights during the call, there are two
situations: 1) if you have no pre-emptive priority, hold down
PTT
key to talk after the talking party stops
talking and releases the
PTT
key;
2) if you have already been programmed with pre-emptive priority, hold down
PTT
key to talk at any time.
Hanging up a Group Call
The calling party can press
to exit a group call. And for the called party in a group call, only those
enabled with "Hang Up" feature (programmed by the dealer) can press
to exit a group call.
7.1.3
Telephone Call
The telephone call is a full-duplex individual call with Hook signaling. To initiate the call, follow the steps
below. To answer or hang up/reject the call, see the “Individual Call” in “TMO”.