Hytera PD792i-Ex, Owner'S Manual

Page: 13 / 33

Icon Radio Status
An all call is in progress or an all call
contact is on the contact list.
An include call is in progress.
LED Indications
To determine the radio status, check the LED indicator on
the radio according to the following table:
LED Indicator Radio Status
Flashes green Being turned on.
Flashes green slowly Standby in trunking mode.
Glows green Receiving.
Glows red Transmitting.
Flashes red
Establishing a call in trunking
mode. This indication is
applicable only to the calling
radio.
Flashes orange slowly Scanning, hunting, or roaming.
Flashes orange rapidly
l
Conventional mode:
Working in emergency
mode.
l Trunking mode:
Establishing a Full Off Air
Call Set- Up (FOACSU)
call. This indication is
applicable only to the
called radio.
Glows orange
Call hang time: No voice is
LED Indicator Radio Status
being transmitted or received
on the channel during a call.
Within such a period, you can
press and hold the PTT key
and speak.
Call Services
You can initiate various types of calls in different
manners.
When initiating a call in Manual Dial manner in trunking
mode, you need to enter a number complying with the dial
rule. For the detailed dial rule, please consult your dealer.
When you are speaking during a call, keep the
microphone about 2.5 to 5 cm away from your mouth.
This ensures optimal voice quality on the receiving radio.
Group Call
A group call is a call from an individual user in a group to
all the other members in the group.
Initiating a Group Call
The following table describes how to initiate a group call
in conventional mode and trunking mode.
Mode Manner Operation
Conventional
Preset Contact
1. Rotate the Channel
Selector knob to
select the channel
associated with the
required group
contact.
2. Press and hold the
PTT key.
Contact
List/Favorites
1. Go to Menu >
Contact > Contact
List / Favorites .
2. Select the required
group contact.
3. Press and hold the
PTT key.
Manual Dial
1. Go to Menu >
Contact > Manual
Dial .
2. Press to switch
the input mode to
Group ID .
3. Enter the required
group ID.
4. Press and hold the
PTT key.
Trunking Preset Contact
1. Rotate the Group
Selector knob to
select the required
9