36
Troubleshooting
Phenomena
Analysis
Solution
The battery may be
improperly installed.
Remove the battery and
attach it again.
The battery may run out.
Recharge or replace the
battery.
The radio can not
be powered on.
The battery may suffer from
poor contact caused by dirtied
or damaged battery contacts.
Clean the battery contacts. If
the problem can not be solved,
contact your dealer or
authorized service center for
inspection and repair.
The battery strength may be
too low.
Recharge or replace the
battery.
The volume may be set to a
low level.
Increase the volume.
The antenna may get loose or
may be improperly installed.
Power off the radio, and
re-install the antenna.
During receiving
signals, the voice is
weak,
discontinuous or
totally inactive.
The speaker may be blocked
or damaged.
Clean surface of the speaker.
If the problem can not be
solved, contact your dealer or
authorized service center for
inspection and repair.
The frequency or signaling
may be inconsistent with that
of other members.
Set your TX/RX
frequency and
signaling to the same as that
of other members.
You can not
communicate with
other members.
The channel type
(digital/analog) may be set
inconsistently.
Make sure all members are on
the same digital/analog
channel.
