4
Charging Status Indication (on charger):
LED Indication
Charging Status
The LED Indicator flashes
red slowly.
Standby (no load)
The LED Indicator glows
red.
Charging
The LED indicator glows
orange.
90% charged
The LED indicator glows
green.
Fully charged
The LED Indicator flashes
red rapidly.
Charging failed
Checking the Battery Power
You can check the current battery power by holding
down the programmed
Battery Power Indicator
key
preset by your dealer. And release the key to exit.
Battery power indications and alert tone are listed
below:
LED Indication/Tone
Battery Power
The LED Indicator glows
green.
High
The LED Indicator glows
orange.
Medium
The LED Indicator glows
red.
Low
The LED Indicator glows red
and an alert tone sounds.
The battery runs low.
Please recharge or
replace the battery for
proper radio operation
Basic Operations
Turning the Radio On/Off
Adjusting the Volume
Selecting a Zone
A zone is a group of channels with the same property,
which can facilitate convenient management over the
+
-
channels. The radio supports 3 zones, each of which
consists of up to 16 channels. Your dealer can program
the zone for your specific needs. You can switch to the
appropriate zone by pressing the programmed
Zone Up
or
Zone Down
key preset by your dealer.
Selecting a Channel
Note: If the Channel Notify feature is enabled
by your dealer, the radio will announce the
channel number upon channel switching.
Call Services
After the radio is powered on, you can make and receive
calls. To ensure optimal volume of the receiving radio,
keep the microphone about 2.5 to 5 centimeters away
from your mouth when transmitting.
ON
“咔嗒 ”
OF F
“咔嗒 ”
"Click"
"Click"
1
2
3
3
2
Charge the Radio
(with the battery attached)
Charge the battery
