20cm
de distance entre le antenne et votre
20cm
between the antenna & your
must be at least 0
cm away from human body.
Antenna gain must not exceed 5
dBi.
Deleting Quick Text Messages
In trunking mode, you can go to
Message
>
Quick Text
to select and delete a quick text.
For
details
on
more
features
and
operations, please visit our website at
http://www.hytera.com
, or scan the QR
code
to download the
relevant user
manual.
9
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the
occupational/controlled environment RF energy
exposure limits in the above standards and guidelines,
users should transmit not more than 50% of the time and
always adhere to the following procedures:
z
z
The antenna must be installed complying with the
requirements of manufacturer or supplier, and it
FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates and can
radiate radio frequency energy. If not installed and used
in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. Verification of harmful
interference by this equipment to radio or television
reception can be determined by turning it off and then on.
The user is encouraged to try to correct the interference
by one or more of the following measures:
z
Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver.
z
Connect the equipment into an outlet on a different
circuit to that of the receiver's outlet.
z
Consult the dealer or an experienced radio/TV
technician for help.
Operation is subject to the following two conditions:
z
This device may not cause harmful interference.
z
This device must accept any interference received,
including interference that may cause undesired
operation.
Note: Any changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
ISEDC Statement
This device complies with Innovation, Science and
Economic Development Canada Compliance
license-exempt RSS standard(s). Operation is subject to
the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes: (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement
ISEDC Radiation Exposure Statement:
This device must be restricted to work related operations
in an Occupational/Controlled RF exposure
Environment.
This equipment should be installed and operated with
minimum distance
body.
ISEDC exposition aux radiations:
Ce dispositif doit être limité aux opérations liées au
travail dans un environnement d'exposition RF
professionnel/contrôlé.
Cet équipement doit être installé et utilisé avec un
minimum de
corps.
3
2
