Product Overview
Product Layout
Mobile Radio
Palm Microphone
Programmable Keys
You can request your dealer to program the following keys as shortcuts to assignable
radio features:
TK
,
P1
key,
P2
key,
P3
key, and
P4
key.
Installation
Instructions
Before you install the radio in a vehicle, read the following instructions carefully:
l
The radio must work with a 13.6V ± 15% negative ground electrical system only.
Ensure to check the polarity and voltage of the vehicle power supply prior to
installation.
l
Check how long the screws will extend from the bottom surface of the radio. Drill the
mounting hole cautiously to avoid damage to the vehicle wiring and other parts.
l
Connect the antenna and power cord to the radio before you install it in the bracket.
And make sure the antenna and power cord are dedicated for digital radios of the
Company.
l
Install the radio with mounting bracket supplied by the Company, to avoid radio
looseness in case of accidents. The loose radio may cause bodily injury.
l
Install the radio in a location where you can reach the front panel conveniently.
l
Keep sufficient clearance at the back of the radio for wiring.
l
Be sure to use the fuse with the same specification for DC power cord upon
replacement.
l
If any other devices are in the vicinity of this radio, the antenna of this radio shall be
no less than 10 meters away from that of such RF device.
Tools
l
Electric drill
l
Cross head screwdriver
l
T20 torx screwdriver
3
