Hytera 982i, Manual, Page: 20 / 20

Note: You will notice I have the Default "Power On" mode set to DMM (Dynamic Mixed Mode) to allow
my repeater to operate in Narrow Band FM or DMR. Check that you have the default set to the mode you
wish to be using (saves you a lot of headaches later). Also, you must have Slot 1 and Slot 2 in the
channel setups selected for IP Connect use.
A problem that has been reported on several sites involve internet access. The Hytera seems to work
much more reliable with a static IP assigned. Otherwise, when the DHCP lease expires, you will need to
reboot the repeater.
In my case, it was cost prohibitive to install a static IP connection from the local cable company. An
inexpensive solution was to obtain a cellular hotspot (in my case T-Mobile) and convert this to a static
connection for the repeater.
I purchased an Alcatel Linkzone 2, 4G LTE Hotspot. Using a BrosTrend AC1200 Dual Band WiFi
Extender (I got mine on Amazon), I was able to connect the ethernet cable to the WAN input of a router.
The router then provides a static IP address for the repeater. So far, it seems to be working!
I certainly hope this information makes putting the Hytera RD-982i online much easier. Enjoy and 73's.