Hytera 982i, Manual, Page: 2 / 20

In order to use your DMR repeater on a network, such as BrandMeister or any other system, the IP Multi
Site Entitlement key MUST be installed (this can be emailed to you. You install it yourself using the PC-
47 cable).
The analog side is 12.5 KHz. If you wish to change this to 25 KHz for local amateurs to have analog
ability (Dynamic Mixed Mode - Both Analog and DMR Simultaneously), then you will also need to
purchase the WB Entitlement key (This must be implemented at a Hytera Dealers Shop using specialized
dealer service software). Both these items may be purchased through Terry Gillard.
Now, if you haven't already, you need to get a 6 digit repeater ID number from http://RadioID.Net. If you
are connecting to BrandMeister, you will also need to create an account. This can be the same account
as your DMR hotspot unless this is going to be a club repeater, in which you may want to create a new
one. Once your repeater is functional and sending to BrandMeister (your repeater ID will show up in the
general repeater area), then open a support ticket for the BrandMeister team to give you admin
privaleges connected to your account.
The following screens will help you with how I programmed the repeater. Note: I am not an expert and
I'm sure there may be some changes that should be made.... this is what works for me. Along with some
of the screens, I will make some comments that may help.