Controls and Instrument Panel
2
─
22
─
Alarm Functions and Setting
●
When the clock reaches the preset time, the alarm sounds for 10 seconds with
the alarm icon blinking.
●
Every hour on the hour, time signal is issued one cycle.
●
Alarm and time signal will be issued, provided that setting is valid, and that the
engine switch is ON.
●
There is one setting available for alarm time. There is a “Yes or No” setting for
time signal. Once a setting is made, it will be retained in memory even after the
engine is turned OFF. However, when the battery is removed, settings will re-
turn to the default settings.
●
The default settings are: Alarm “OFF,” Time signal “OFF,” Alarm time “9:00.”
●
Even while the vehicle is traveling, when the time comes to the alarm or time
signal, the existing display changes to the clock display and alarm or time sig-
nal will be issued. The alarm continues for 10 seconds unless it is stopped by
pressing an operation button (any button displayed).
●
Adjusting date and time
Push and buttons for more than 2 seconds.
Then, short beep is heard and the display changes.
button
Blinks
Blinks
Blinks
Blinks
Blinks
button
button
button
As shown on the right, each time you push button,
the item activated for adjustment is selected in
order the year, the month, the date, the hour and the
minute and blinks.
To change the setting value of the item activated
for adjustment, push button as many times
as it takes to get the value you desire.
If you push and keep on holding down the button,
the value keeps on getting larger and larger
automatically.
Push (M) button when the setting is completed,
return to normal display mode.
When any display pushes (M) button, return to
normal display mode.