1. RETURN SPRING
2. GUIDE PLATE
3. RETURN SPRING
4. SPRING ACTUATOR
Figure 11. Return Springs, S30-35FT, S40FTS (F010), H1.6-1.8FT, H2.0FTS (H30-35FT, H40FTS) (G001),
S50CT (B267), and H2.0-2.5CT (H50CT) (B274)
NOTE:
Seal and bearings are to be installed flush
with hub. Seal is to be installed with no grease or
oil on outside surface.
17.
Clean bearings and lubricate them with wheel
bearing grease. Install bearings and seals in
brake drum. Install assembly on axle housing.
See Figure 12 and Figure 13.
Service Brakes Repair (Dry Brake)
1800 SRM 1743
14
