Hyster CHALLENGER H135XL, Service & Repair Manual

Page: 15 / 22

100 SRM 322 Engine Repair
10. See Overhead Guard Repair, and install the over-
head guard. Install the brake fluid reservoir on
the bracket. Install the hood. Connect the cables
at the battery.
Figure 5. Engine Mounts
Legend for Figure 5
NOTE: A = 40 N•m (30 lbf ft) TORQUE
B = 56 N•m (41 lbf ft) TORQUE
C = 50 N•m (37 lbf ft) TORQUE
D = 165 N•m (122 lbf ft) TORQUE.
A. FAN END OF ENGINE (DIESEL SHOWN)
B. FLYWHEEL END OF ENGINE
1. FRAME
2. MOUNT BRACKET
3. WASHER
4. ENGINE
5. OVERLOAD
WASHER
6. ENGINE MOUNT
7. WASHER*
8. REBOUND
WASHER
9. TORQUE
CONVERTER OR
CLUTCH HOUSING
*USE AS NECESSARY TO ALIGN U-JOINT TO
WITHIN 0.5 to 1.5 mm (0.02 to 0.06 in.) OF TRUE
VERTICAL ALIGNMENT
9