Hyster B218, Periodic Maintenance Procedure

Page: 18 / 26

Recommended Schedule of Maintenance 8000 SRM 1009
HYDRAULIC SYSTEM CHECK
A - Every 8 Hours
B - Every 350 Hours
C - Every 2000 Hours X - Indicates Visual Inspection, Repair, or
Replace as Required
O - Indicates Drain and Fill
Component: A B C
All Hydraulic Hoses and Fittings for Leaks, Wear, Kinks, Flattening, and Charring X
For General Leaks X
NOTES:
1. Tires - Condition affects stability, safety, and load capacity that can be handled safely.
2. Under Normal Conditions, it is recommended that the Load Wheel Bearings be lubricated every 200
hours, minimum. The load wheel bearings are cleaned and repacked every 2000 hours. For trucks equipped
with the Food Processing Package or operate under Wet or Corrosive Conditions, it is recommended
to lubricate the lift linkage every 50 hours. Load wheel bearings should be inspected every 350 hours.
3. See Capacities and Specifications 8000 SRM 1010 for all lubrication specifications.
4. The presence of hydraulic fluid on cylinder rods and fittings does not necessarily indicate a leak.
5. Recycle all waste oils.
DRIVE UNIT CHECKS
A - Every 8 Hours
B - Every 350 Hours
C - Every 2000 Hours X - Indicates Visual Inspection, Repair, or
Replace as Required
O - Indicates Drain and Fill
Component: A B C
Brake Wear and Adjustment X
Electric Motor and Drive Unit Mounting Bolts
X
Wheel Bolts - Torque to Specifications X
NOTES:
1. Tires - Condition affects stability, safety, and load capacity that can be handled safely.
2. Under Normal Conditions, it is recommended that the Load Wheel Bearings be lubricated every 200
hours, minimum. The load wheel bearings are cleaned and repacked every 2000 hours. For trucks equipped
with the Food Processing Package or operate under Wet or Corrosive Conditions, it is recommended
to lubricate the lift linkage every 50 hours. Load wheel bearings should be inspected every 350 hours.
3. See Capacities and Specifications 8000 SRM 1010 for all lubrication specifications.
4. The presence of hydraulic fluid on cylinder rods and fittings does not necessarily indicate a leak.
5. Recycle all waste oils.
14