TESTER MENU
NOTE:
The Tester function can be used to trouble-
shoot multiple systems simultaneously while the
truck is in operation.
The most important input or output signals can be
measured in real time using the TESTER function
of the handset. The handset acts as a multimeter to
read voltage, current, temperature, switch state,
and other functions.
1.
BATTERY VOLTAGE = battery voltage, nomi-
nal value = 24V.
2.
MOTOR VOLTAGE = armature voltage ob-
tained, shown in volts.
3.
MOTOR CURRENT = armature current during
traction (positive value) or braking (negative
value) in amps.
4.
FIELD CURRENT = field current in the selec-
ted traction direction in amps.
5.
EVP VOLTAGE = proportional lowering valve
coil voltage.
6.
TEMPERATURE = controller temperature, °C.
7.
ACCELERATOR = directional control voltage
received from control handle.
8.
LIFTING CONTROL = proportional lifting volt-
age received from control handle.
9.
TILLER SWITCH = control handle switch in-
put, ON/OFF.
10.
FORWARD SWITCH = forward direction re-
quest from control handle card, ON/OFF.
11.
BACKWARD SWITCH = backward direction
request from control handle card, ON/OFF.
12.
LIFTING SWITCH = lifting function request
from control handle card, proportional lift
switch, ON/OFF.
13.
LOWERING SWITCH = lowering function re-
quest from control handle card, proportional
lowering switch, ON/OFF.
14.
FORK LIFT SWITCH = lifting function request
from control handle card, ON/OFF.
15.
FORK LOW SWITCH = lowering function re-
quest from control handle card, ON/OFF.
16.
R-SHIFT SWITCH = sideshift right switch, ON/
OFF.
17.
L-SHIFT SWITCH = sideshift left switch, ON/
OFF.
18.
BELLY SWITCH = traction reversing switch to
the controller or traction reversing request from
control handle card, ON/OFF.
19.
SNAIL SWITCH = snail request from control
handle card allows machine to drive with con-
trol handle up, turtle speed switch, ON/OFF.
20.
HORN SWITCH = horn request from control
handle card, ON/OFF.
21.
SW4-SW9 = auxiliary function jumper.
22.
BATTERY MODEL = battery-type of input
switch, ON/OFF. ON = flooded battery (input
closed), OFF = sealed battery (input open).
23.
BATTERY CHARGE = battery charge indica-
tion, %.
SET OPTION MENU
DRIVE
MODES
ON
The truck has three perform-
ance modes, each with a fixed
set of parameters. This func-
tion is enabled by setting
DRIVE MODES = ON.
OFF
DRIVE MODES disabled.
Custom Performance Mode is
enabled, the adjustable param-
eters on Table 1 can be adjus-
ted.
2200 SRM 1064
Programming
7