Two-Stage Mast
4000 SRM 764
1.
HYDRAULIC HOSE
2.
FRAME
Figure 8. Hydraulic Hose
7.
Connect the proximity switch wire harness to the
proximity switch connector located on the mast
cylinder. Use clamp straps to secure the wire
harness traveling up the cylinder. The harness
needs to travel through the grommet and down
the mast cylinder See Figure 9.
8.
With the hoist still attached to the platform, raise
the platform to a height that will allow for easy
access under the platform.
NOTE:
If your truck is equipped with wire guidance
refer to the Installation section of Wire Guidance
2200 SRM 1471 before continuing with installation.
9.
Under the platform, insert the four mast mount-
ing bolts and washers as shown in Figure 10. Af-
ter inserting the bolts lower the platform.
1.
PROXIMITY SWITCH
2.
HARNESS
Figure 9. Proximity Wire Routing and
Connection
1.
CAPSCREW
2.
WASHER
3.
MAST ASSEMBLY
Figure 10. Mast Connection
12